ADH1B SAFETY DATA SHEET
1. IDENTIFICATION OF THE PREPARATION AND THE COMPANY
Product Name:
|
Product Code:
|
|
SHEPPY JELLY ADHESIVE G1
|
G1
|
|
SHEPPY JELLY ADHESIVE G2
|
G2
|
Supplier: Sheppy Limited
Rushenden Road
Queenborough
Kent
ME11 5HH
Telephone No: (01795) 580181
Fax No: (01795) 580649
2. COMPOSITION/INFORMATION ON INGREDIENTS
Ingredient Name:
|
Phenol
|
|
|
CAS No.
|
EEC No.
|
Content
|
Risk Phrases (R No.)
|
108-95-2
|
203-632-7
|
<0.25%
|
24/25 - 34
|
3. HAZARDS IDENTIFICATION
Hazard identification not required - product not
regarded as a health hazard under current legislation.
4. FIRST AID MEASURES
Inhalation: No hazard.
Skin Contact: While the product is not a primary
irritant, prolonged and repeated contact can cause a
reaction, especially to sensitive skins. Barrier creams
or gloves in these cases are necessary.
Eye Contact: Jelly adhesives are not a primary
irritant, but contact may cause smarting. Irrigate
thoroughly with warm water. If symptoms persist, seek medical
advice.
Ingestion: Jelly adhesives are a non-toxic product
and are unlikely to be unintentionally ingested in
sufficient quantity to cause discomfort. In cases of
large quantity ingestion, use an emetic and obtain
medical advice at once.
5. FIRE FIGHTING MEASURES
Extinguishing Media: No restriction necessary. Jelly
adhesives are non-flammable, having no flash point, and therefore no special precautions are necessary.
There is no restriction on extinguishing needed.
Hazardous Decomposition Products: Oxides of Nitrogen,
Carbon Dioxide and Carbon Monoxide.
6. ACCIDENTAL RELEASE MEASURES
Spill Clean-Up Methods: Spillages may be mopped up
with hot water. However, larger spillages may be peeled
from most working surfaces when cool and disposed of
according to Local Authority Regulations.
Cleaning: Wash all equipment with warm water. If the
adhesive has dried, it is preferable to soak the
equipment in cold water for 1 to 2 hours first.
7. HANDLING AND STORAGE
Storage: No special precautions are necessary. Store
unopened containers in a cool place. No protection from
frost is necessary.
Handling: When handling, it is recommended that
barrier creams or gloves are used, and where splashing
may occur, wear goggles when the adhesive is heated and
in a liquid state.
8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Ingredient Name:
|
Phenol
|
|
|
CAS No.
|
STD
|
LT Exp.
|
ST Exp.
|
|
|
|
(8 hrs)
|
(10 mins)
|
108-95-2
|
OES
|
5 PPM
|
10 PPM (SK)
|
No specific personal protection is necessary,
although gloves may be advisable to prevent repeated or
prolonged skin contact and goggles to avoid splashes to the
eyes where the method of application makes it necessary.
Jelly adhesives contain 0.25% Phenol. It has been our
experience over many years that this preservative, used at the above level, presents no danger - provided the
general precautions (as note number 4 of this leaflet)
are followed.
9. PHYSICAL AND CHEMICAL PROPERTIES
Colour: Brown
Appearance: 12.5 kg Jelly Blocks
Odour: Mild
Physical Data Comments:
When heated to the recommended operating temperature,
these adhesives become liquid, employing the modern
technique of forming a bond on cooling after application
to the substrate.
10. STABILITY AND REACTIVITY
Stability: Stable. If stored correctly, product will
remain in a usable state for at least six months.
Hazardous Decomposition Products: Fire - Oxides of
Nitrogen, Carbon Dioxide and Carbon Monoxide.
11. TOXICOLOGICAL INFORMATION
This product is non-toxic.
12. ECOLOGICAL INFORMATION
Degradability: Being a natural product this product
is environmentally friendly and is biodegradable. Paper and board bonded with this product is recyclable.
13. DISPOSAL CONSIDERATION
The dried adhesive can be disposed of with normal
waste in accordance with Local Authority Regulations.
14. TRANSPORT INFORMATION
Label for Conveyance: No transport warning sign
required by road, air, sea or rail.
15. REGULATORY INFORMATION
Label for Supply: No Classification Given
Risk Phrases: Not Applicable
Safety Phrases: Not Applicable
16. OTHER INFORMATION
User Notes:
Leaflet ADH/1B conforms to the Chemicals (Hazard
Information and Packaging) Regulations 1993. The
information is based on the current state of our
knowledge and is intended to describe the product from
the view-point of safety requirements only.
REF: LEAFLET CHIPS/ADH1B ISSUE9 –DECEMBER 2006
Buy adhesives and glues online, it's easy with Paypal...
|
