A specially formulated low odour hot natural adhesive, manufactured using Technical Gelatine, primarily designed for use on: Immecia, Stokes & Smith, Caledex and Nubal coating and box covering machines.

Its different ingredients to G1 and higher tack give it a much greater capacity to bond more difficult surfaces and heavier weight covering papers. It should be diluted with warm water to suit work in hand and is completely compatible with our Sheppy Jelly Adhesive G1, with which it may be mixed to meet very specific requirements.

Like all Sheppy Jelly adhesives in our 'G' range, it displays excellent non-warp characteristics and has the capacity to spread evenly without striation lines.

DIRECTIONS FOR USE:

Supplied in 12.5 kilo cases. Slabs are partially cut into approximately 1 kg., easily separated, pieces.
• The adhesive should be placed into the adhesive trough and heated to a temperature of 50°- 60°C (120°- 140°F) when it will liquify and be ready for use. In no circumstances must the heat of the adhesive exceed 60°C (140°F). Continuous running above 60° C will cause the adhesive to deteriorate.
The adhesive may be used as supplied, but may be diluted by up to 15% to suit the work in hand (dilute with warm water). If evaporation has occurred, small quantities of warm water may be added.

NB: Open time of this adhesive can be lengthened by the addition of warm water.

The adhesive is completely non-foaming and entirely innocuous.

F.D.A. STANDARDS: The materials used in this formulation conform to the requirements of the Code of Federal Regulations 21 CFR175, 105.

Effect on the Environment

Being a natural colloid, this adhesive is water soluble and any paper/board bonded with it is completely recyclable. It is also biodegradable in normal effluent processing plants and will break down in the soil to become an organic plant nutrients.

FOR HEALTH AND SAFETY DETAILS, PLEASE SEE LEAFLET NUMBER ADH/1B

REF: LEAFLET TECHNICAL/G3